Home QuickEmbed >> Products >> ARM >> Product Information
Similar Product
普通Product micro imx287 som
普通Product STM32F217ZGT6 Kit Boar
普通Product mini2440 S3C2440 SBC Q
普通Product OpenJTAG
普通Product Wiggler H-JTAG/HJTAG
普通Product AM3517SBC Kit Board
普通Product Tiny6410 S3C6410 SOM S
普通Product ULink2 ARM JTAG emulat
普通Product LPC2388 Development Bo
普通Product S5PC100SBC Dev Kit
普通Product LPC1768 NXP ARM Cortex
普通Product LPC1114 Cortex M0 Kit 
普通Product S3C2416SBC
普通Product Mini6410 SBC QE6410 Qu
普通Product STM32 F107 Kit board C
普通Product Android S5PC110 Dev Ki
普通Product LM3S69XX dev kit
普通Product LPC2148 network dev ki
普通Product LPC1343 ARM cortex M3 
推荐Product STM32 F103 Cortex M3  
推荐Product Micro2440 S3C2440 SOM 
普通Product OMAP3530SBC
普通Product MiniARM
普通Product S3C6410 SOM SBC QE6410
普通Product Cortex-A8 ARM Emulator
推荐Product J-Link V8 JLink Segger
推荐Product Mini2440 7inch QE2440 
推荐Product Mini2440 3.5inch QE244
普通Product PXA270 Dev Kit
普通Product TI OMAP3530 Evaluation
Modules
固顶Product Bluetooth sensor QButt
普通Product NFC reader module boar
普通Product net video
普通Product AD DA converter TLC154
普通Product Sensors
普通Product OSD module for highway
普通Product OSD module
普通Product RF Data Module
普通Product CDMA 3G usb modem
普通Product PoE adapter
普通Product Robot Sensor and Motor
普通Product RFID reader
普通Product TI lithium battery cha
普通Product Lithium Battery charge
普通Product VGA module for S3C2440
普通Product GPRS module for omap35
普通Product WIFI module for omap35
普通Product VGA adapter for OMAP35
普通Product camera for omap3530
普通Product CMOS Camera Module
普通Product GPS module
普通Product mini USB WIFI WLAN mod
普通Product GPRS Data Gateway
普通Product GPRS modem
普通Product CCD-JPEG-Capture
Accessory
普通Product cables mini2440 mini64
普通Product video capture usb ccd
普通Product Zigbee RS232/485/USB m
普通Product Wireless AV transmitte
普通Product audio power amplifier
普通Product TTL to LVDS converter
普通Product one RS232 to five RS23
普通Product RS232 WIFI mini server
普通Product CAN-USB RS232 converte
普通Product rs232 rs485/422 conver
普通Product thermal printer
普通Product from rs232 to wireless
普通Product RS232 to SD
普通Product Serial UART to Etherne
普通Product USB to TTL COM
普通Product USB to Parallel Port
普通Product Bluetooth Adapter
普通Product USB to RS232
Solution
固顶Product bluetooth sensor tag V
普通Product adda pwm board
普通Product mini server qeServer
普通Product UPuter Pi arm mini pc 
普通Product 5" 7" capacitive touch
推荐Product 9D position pose syste
普通Product Remote Camera
普通Product ipad case
普通Product S3C2440 MID PAD
普通Product S3C2416/2440/6410 7inc
普通Product VIA Android MID
普通Product MID enclosure cases
普通Product OMAP3530 MID Solution
普通Product Android MID
普通Product enclosure for mini2440
推荐Product GPS GPRS LBS
普通Product Handheld Infrared Temp
普通Product Real time Global GPS T
普通Product 12inch LCD monitor ARM
普通Product multilanguage 3D PND
普通Product Ubuntu Android MID 4.3
普通Product S3C6410 MID solution
普通Product Ubuntu Android MID 7in
普通Product Case for 7 inch LCD an
普通Product Video Surveillance Sol
普通Product Control system
普通Product sensor data monitor sy
普通Product FingerPrint access con
普通Product Software IP protect
推荐Product Sensor Data Capture Co
Support&Service
普通Product 3D printer Stereolitho
普通Product Product Engineering Li
普通Product Embedded System Design
普通Product ARM Architecture&CPU l
推荐Product Robot Machince Arm Mot
普通Product UI design service
普通Product Mould Design
普通Product PCB Design and Manufac
普通Product linux porting
普通Product WinCE porting
推荐Product Software develope R&D 
推荐Product arm board design ODM E
推荐Product Product Design Case/Sh
普通Product Sourcing and Buying Se
普通Product Solution Service
J-Link V8 JLink Segger ARM Emulator Debugger

Model Standard
Vendor Quickembed Trakmark
In Stock Yes Lead Time  3 days
Promotion Update Time
Voucher Limit
Product Name J-Link V8 JLink Segger ARM Emulator Debugger
Product ID 2009052917121896 Warranty  1 Year
Price US$59.00/unit

Shipping Fee and tax not included.

Turn your prospective idea into practical product real profit in 6 months.
Product Introduce:
For ARM7/ARM9/ARM11/Cortex M3/A8 S3C2410 S3C2440 S3C6410. accelerate your developing while saving your investment.
Product Detail:

 

 

 

  

J-LINK V8 ARM USB JTAG Emulator.

Full version, support firmware updates

Refer to:
http://www.segger.com/jlink.html
http://www.segger.com/jlink-flash-download.html

Supports ARM7, ARM9, ARM11, Cortex-M3 core

Supports ADS, IAR, KEIL development environment

J-Link JTAG/SWD Emulator with USB interface

J-Link is a USB powered JTAG emulator supporting a large number of CPU cores.
Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes.
J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.
Including all models, more than 100,000 J-Links have been sold so far, making J-Link probably the most popular emulator for ARM cores and the de-facto standard.

Features
•Direct download into flash memory of most popular microcontrollers supported
•Supported CPUs: Any ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4, Cortex-R4, RX610, RX621, RX62N, RX62T, RX630, RX631, RX63N
•Download speed up to 800 Kbytes/second
•Supports unlimited breakpoints in flash memory1
•Supported by all major IDEs
•Free software updates2
•Supports concurrent access to CPU by multiple applications3
•Crossplatform support (runs on Windows, Linux, Mac OS X)4
•Intelligence in the emulator firmware
•TCP/IP server included. Allows using J-Link remotely via TCP/IP
•GDBServer included
•Production flash programming software (J-Flash) available
•Software Developer Kit (SDK) available
•Supports multiple target interfaces: JTAG, SWD
•Supports SWV/SWO (Serial Wire Viewer / Serial wire output)
•Wide target voltage range: 1.2V - 3.3V, 5V tolerant
•Supports JTAG chains with multiple devices
•Embedded Trace Buffer (ETB) support
•Various target adapters available, including optical isolation adapter.
•RDI interface DLL available.
•Fully plug and play compatible
•No power supply required, powered through USB
•Support for adaptive clocking
•All JTAG signals can be monitored, target voltage can be measured
•Target power supply: J-Link can supply up to 300 mA to target with overload protection
1 The unlimited breakpoints in flash memory feature can be used free of charge for evaluation. The evaluation period is not time limited. For commercial use a separate license is required.
2 As a legitimate owner of a SEGGER J-Link, you can always download the latest software free of charge. Though not planned and not likely, we reserve the right to change this policy. Note that at older models may not be supported by newer versions of the software. Typically, we support older models with new software at least 3 years after end of life.
3 J-Link allows multiple applications to access a CPU at the same time. This has numerous applications. J-Link commander can be used in parallel to a debugger, a tool to communicate via DCC can be used in parallel to a debugger or a visualisation tool such as Micrium's u/C-Probe or SEGGER's kernel viewer embOSView. This feature is currently not available for Cortex A and R cores.
4 The MAC and Linux versions are fully usable, but limited to the following components:
J-Link Commander, command line GDBServer, shared library (DLL-equivalent).

V8.0 improvements than V7.0:

(1) improving the SWD interface circuit, the use of counterfeit JLINK V8 JTAG debug debug mode can be normal
when debugging CORTEX-M3 core chips will not use SWD functionality
V7 hardware SWD part with the V8 not the same, if forced to switch to SWD mode, JLINK the main chip will be destroyed!
JLINK V8 interface circuit using two-level converter chip, using a level converter chip will be fake V8!

(2) V8.0 using two-color LED can indicate more work status, V7.0 only an LED indicator light

(3) to optimize the firmware structure and function of the firmware upgrade bootloader area to move to double the size of the application area
 Easy to add new features;

(4) support for ARM11 better and faster than JLINK V7, is the first choice for ARM11. 
 

Other differences:

1) J-Link V8 use AT91SAM7S64, expanding the capacity of Flash and SRAM to facilitate future upgrades;

2) J-Link V8 improves the SWD interface, an increase of driver chips,
(V6 and V7 in the SWD is a direct quote from the pin to the target CPU board); 

3) J-Link V8 SWD improved control methods, V7 is the I / O direct-drive, V8 with a special method, there is not effective anyway V8's SWD velocities slower than the V7

4) J-LinkV8 have three lights, one directed USB Communications, a direct target CPU, reset state, a direct 5V output is turned on V7 only 1 USB communication indicator

5) J-Link V8's firmware update process is not DLL, and can not write the same as V7 Bootloader on a simple easy to crack V8's Bootloader need to implement USB device connectivity;

Products Introduce 
J-Link emulation is SEGGER company ARM core chip to support the launch of the JTAG emulator.
With the IAR EWARM, ADS, KEIL, WINARM, RealView and other integrated development environment supports all ARM7/ARM9 core chip simulation
Through RDI interface and the integrated development environment for seamless connectivity, easy, convenient connections
Easy to learn, is learning and developing ARM best and most practical development tools.

J-Link ARM Features:
* IAR EWARM integrated development environment seamlessly connected JTAG Emulator
* Support all ARM7/ARM9 core chips, as well as cortex M3, including Thumb mode
* Support for ADS, IAR, KEIL, WINARM, REALVIEW almost all of the development environment
* Download speeds of up to ARM7: 600kB / s, ARM9: 550kB / s, through the DCC up to 800 kB / s
* The maximum JTAG speed 12 MHz
* Target board voltage range 1.2V-3.3V, 5V compatible
* Auto speed recognition
* Monitoring all JTAG signals and target board voltage
* Fully plug and play
* Use the USB power supply (but not the target board power supply)
* With a USB cable and 20-core flat cable
* Support multi-device JTAG serial connection
* Standard 20-core JTAG emulation connector
* Optional 14-core JTAG emulation connector
* Optional adapter for 5V targets board 
 

J-Link support for ARM cores:
* ARM7TDMI (Rev 1)
* ARM7TDMI (Rev 3)
* ARM7TDMI-S (Rev 4)
* ARM720T * ARM920T
* ARM926EJ-S
* ARM946E-S
* ARM966E-S
* ARM11
* Cortex-M3

 

Specifications *

General
Supported OS Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows XP x64
Microsoft Windows 2003
Microsoft Windows 2003 x64
Microsoft Windows Vista
Microsoft Windows Vista x64
Windows 7
Windows 7 x64
Electromagnetic compatibility (EMC) EN 55022, EN 55024
Operating temperature +5°C ... +60°C
Storage temperature -20°C ... +65 °C
Relative humidity (non-condensing) Max. 90% rH
Mechanical
Size (without cables) 100mm x 53mm x 27mm
Weight (without cables) 70g
Available Interfaces
USB interface USB 2.0, full speed
Target interface JTAG 20-pin (14-pin adapter available)
JTAG/SWD Interface, Electrical
Power supply USB powered
Max. 50mA + Target Supply current.
Target interface voltage (VIF) 1.2V ... 5V
Target supply voltage 4.5V ... 5V (if powered with 5V on USB)
Target supply current Max. 300mA
Reset Type Open drain. Can be pulled low or
tristated.
Reset low level output voltage (VOL) VOL <= 10% of VIF
For the whole target voltage range (1.8V <= VIF <= 5V)
LOW level input voltage (VIL) VIL <= 40% of VIF
HIGH level input voltage (VIH) VIH >= 60% of VIF
For 1.8V <= VIF <= 3.6V
LOW level output voltage (VOL) with a load of 10 kOhm VOL <= 10% of VIF
HIGH level output voltage (VOH) with a load of 10 kOhm VOH >= 90% of VIF
For 3.6 <= VIF <= 5V
LOW level output voltage (VOL) with a load of 10 kOhm VOL <= 20% of VIF
HIGH level output voltage (VOH) with a load of 10 kOhm VOH >= 80% of VIF
JTAG/SWD Interface, Timing
JTAG speed Max. 12MHz
SWO sampling frequency Max. 6MHz
Data input rise time (Trdi) Trdi <= 20ns
Data input fall time (Tfdi) Tfdi <= 20ns
Data output rise time (Trdo) Trdo <= 10ns
Data output fall time (Tfdo) Tfdo <= 10ns
Clock rise time (Trc) Trc <= 10ns
Clock fall time (Tfc) Tfc <= 10ns

* J-Link hardware revision 8 and up

 

Package List:
1x J-Link V8 emulator
1x 20P line of a standard JTAG
1x USB cable
1x Download Link for Driver Software

 

Only $9.9 for SHIPPING ALL OVER THE WORLD!

Full quality assurance for one year, add $9.9 to extend one more year!
If you not satisfy in 7 days we refund without excuse!


If you need transfer interface board and cables, plus 10USD:




More Information



Support ARM11 s3c6410

SWV http://www.segger.com/jlink_swv.html
The supported SWV speeds depend on the connected emulator.
They can be retrieved from the emulator.
Currently, the following are
supported:

Emulator Speed , formular Resulting max. speed
J-Link V6
6MHz/n, n >= 12 500kHz
J-Link V7 6MH z/n, n >= 1 6MHz



4.jpg

5.jpg


support firmware automatic update

Supported Devices


Online Order Now! Global Shipping in 2 days!


We accept online order and ship globally, our online order system will tell shipping fee according to your address, and automaticly generate PI Invoice to you.
Please send email to us if you have any question for this product, or want product document in more detail, or question for order or payment or shipping. Contact information is at the bottom of the page.
Sample price is announced hereby above. Ask for quotation when order quantity > 3pcs.
Parts of product, like core module, SBC, stamp, daughter card, single board(without LCD), motherboard, baseboard, LCD, sell seperately, email us for quatation.
find gps,gprs,wifi,camera etc in 
modules and bluetooth,485,can etc in accessories, or enclosures, jlink v8, ulink, openjtag etc tools.
We are now offer
Capacitive Touch Panel for all of our ARM platforms.


Product Warranty and Technical Support. 
Our delivery has mass producing quality assurance. We warrants our products against manufacturing defects for a period of one year from date of shipment to the original purchaser, and offers software updates lifetime to registered customers free of charge. We have an experts team to provide technical support.
We have been running 8 years, this is our license from Chinese government website:
http://www.sgs.gov.cn/LicenceView/Id=20120530152953117
We have served 1000+ customers from 100+ countries all over the world, Please find a list of part of our customers here:
http://www.quickembed.com/Tools/Shop/Customer/Index.html
We can provide contact if you want a reference.
We are looking for sell/retail/ditribute/channel partners in all over the world.

You are encouraged to share your information in the forum, share your business information, share your success, it will get you more business and success!
If you need some partner, technical, hardware, software, marketing, channel, sales, just post your message on the forum, because someone in the world may be finding you!
Our world and technology is changing and growing so fast that no one no single company can do all work, clever people can get information from the web and try to make it but will take a lot time to learn, we need cooperation!
Promote your product in the forum, or just an idea, don't be afraid other will copy, there are similar products and ideas all over the world, the only difference is who will make it real in a right time in success!
If you want more formal, list your product in our web catalog, to promote it to all over world, we are open, please send email to us.
We can build a prototype sample very fast, for you, to demonstrate, to your customer.
A demo is much more powerful than a thousand words!
It will save you a lot of valuable time!
Make a concrete step from good idea to real success!
We help you succeed, providing ARM Embedded Quick Demo.

ODM/OEM Service


Layout, for special defined interface and resize the board for your requirements.
Product prototyping, sourcing accessories for your product requirements.
Recommend GPS module, GSM/GPRS module with communication software.
Software Developing.
Sourcing solution and turn key to you.

You might have interest to know what products this board makes, please send us an email to know more product design cases.  Embedded pc computer system has broad usge, some examples:
QButton, world first post-it bluetooth sensor, open data, customize for your usage.
 
Popular bluetooth v4.0 ble sensor tag, smart devices, wearable electronic computer.
 
Palm size desktop computer.
  
U-disk size computer
 

Android 4.0 5inch 7inch capacitive touch pad


9D position pose system digital compass
GPS, Compass and accelerator in one tiny module.

GPS GPRS LBS solution.
Navigate Locate Track Solution, Location Based Service


Robot Motor Medical Testing System
One motor control board controlling 9 motors at the same time
Robot arm move and grab.
 

12" to 15" size multimedia or HMI solution, fixed on wall or desk or large vehicle:

Backside:

10" solution, fixed in car:

7" solution, fixed in car:
more 7inch cases here:
http://www.quickembed.com/Tools/Shop/Solution/201001/67.html



Using SBC is as easy as 1,2,3; simply prototype and test your development using a suitable SBC, then design your custom connector board and finally build your product.

The advantage of SBC is that when you define a new product, you have only small change on baseboard/motherboard, no change on SBC/daughter board, it saves great effort, and save much expense as the SBC is big lots produced while baseboard can be produced in small lots,  also this helps improving the quality of your products.
Read more about arm board customize design odm service.
Read more about arm linux driver and application software develope.

Our mission is to provide quick start and easy use embedded platforms for maximize customers productivity. If you find any platform more competitive than ours, please do let us know. We can improve our product for you.
Those who want to list your product here in this web and sell to worldwide customers, please contact us.

-- Stay Hungry. Stay Foolish. Memory of Steve Jobs.
-- Dream bigger, Love Deeper, Live Longer! :-)

 



Search Similar or Related Products:
Customers Feedback:
Contact Us Instant: Skype: Phone Call: Tel: +86-2l-228l84l9. Email: quickembed@gmail.com, support@quickembed.com,
Welcome to Visit Us, Address: Jianchuan Road No.951, A409, Cangyuan Sci&Tech Park, Shanghai, China.

Copyright: QuickEmbed Technology Co.,Ltd., 2002-2014