omap3530 600MHz ARM Cortex-A8 256M DDR board, gps, gprs, WIFI, single board computer

- TI OMAP3530 Processor based on 600MHz ARM Cortex-A8 core
- 256MByte DDR SDRAM and 256MByte NAND Flash
- UART, USB OTG, Ethernet, Camera, Audio, SD/MMC, Keyboard, Jtag,...
- Supports 24-bit TFT LCD, DVI-D and TV S-Video Output Display
- Supports Linux2.6 and WinCE 6.0, Android Anstrom and DVSDK 
Notice: This product is at risk of out of stock, people need it in a harry should ask us for lead time.

The Texas Instruments OMAP3530 is a high-performance processor based on the enhanced OMAP™ 3 architecture. It includes many internal subsystems designed to support high-speed, multi-thread processing applications. The OMAP3530 includes an integrated advanced Superscalar ARM Cortex-A8 core, an IVA2.2 subsystem with a C64x+ digital signal processor (DSP) core, 2D/3D graphics accelerator, display subsystem, a camera ISP (Image Signal Processor), and high-performance system interconnects and industry-standard peripherals. The device includes state-of-the-art power-management techniques required for high-performance mobile products and supports high-level operating systems such as Windows CE, Linux, Symbian OS and Palm OS.

Evaluation Board is a compact board using OMAP3530 microprocessor. It takes full features of this processor and supports 128MByte DDR SDRAM and 128MByte NAND Flash as well as high-speed USB2.0 OTG function. The board has exposed many other hardware interfaces including RS232 serial port, LCD/TSP, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C and JTAG. The board has two methods to boot the system from either SD card or NAND flash. It is able to support WinCE and Linux OS and provided with WinCE6.0 BSP and Linux2.6.28 BSP. We also provides demo of Google Android OS and Angstrom (GPE) for user experience.

Evaluation Kit includes the evaluation board and all necessary accessories to help users start their design of multimedia applications. The board is preloaded with Linux OS in NAND flash and WinCE OS in SD card. User can display the subsystem using a 4.3" TFT LCD and Touch screen or using a DVI-D monitor through an HDMI to DVI-D calbe, or using TV for NTSC/PAL video out. The USB OTG interface can also be used as USB Host function with a Mini-A to Standard-A cable, or used as USB Device function with a Mini-B to Standard-A cable. The board has audio and video codecs, with the help of DSP, H.264, MPEG4, CIF, and D1 media formats all can be supported. Along with the kit, We provides user manual, schematic drawing and datasheet documents to help customers better understand and use the kit.

Evaluation Kit

• One Evaluation board
• One 4.3, 5.6 or 7 inch TFT LCD (Including Touch panel)
• One SD card
• One Serial cable (IDC10-to-DB9)
• One 5V@2A Power adapter
• One Touch Pen
• One USB cable (Standard A Male to Mini-B Male)
• One USB cable (Standard A Female to Mini-A Male)
• One Cross Ethernet cable
• One HDMI to DVI-D cable
• One S-Video cable

Features of Evaluation Board

• Dimensions: 110mm x 95mm
• Working temperature: 0 to 70C
• Processor: TI OMAP3530 microprocessor with 600MHz ARM Cortex-A8 RISC Core
• Power supply: +5V
• 128/256MB DDR SDRAM, 166MHz
• 128/256MB NAND Flash, 16bit
• LCD/Touch Screen interface (50-pin FPC connector, support resolution up to 2048*2048)
• DVI high-resolution image output port (HDMI interface, support 720p, 30fps signal)
• S-Video display interface
• One audio input interface (3.5mm audio jack)
• One 2-channel audio output interface (3.5mm audio jack)
• One 10/100M Ethernet interface (RJ45)
• One High-speed USB2.0 OTG port (Mini USB type interface)
• One High-speed USB2.0 Host port (USB A type interface)
• Two serial ports (one 3-wire RS232 serial port led out from 2.54mm 10-pin connector and one 5-wire TTL serial port led out from expansion connector)
• SD/MMC interface (supports 3.3V and 1.8V logic voltage)
• One camera interface (30-pin FPC connector, support CCD or CMOS camera)
• 6*6 keyboard interface
• One 14-pin Jtag interface
• Four buttons (Reset, Boot, User defined, On/Off)
• One expansion connector (2.0mm 40-pin SMT Female Pin Header, McSPI, McBSP, I2C, HDQ, GPIO are led out from this connector)
• Supports Camera, WiFi, GPS, GPRS, 3G module, please find in modules and accessory catalog.

Software

OS	Item	Feature	Description
Linux	Boot	Version	X-loader-1.41 U-boot 1.3.3
		Boot Mode	Boot Linux from SD card, NAND Flash or Ethernet
		Image update	Support updating image from SD card or Ethernet
	Kernel and drivers	Version	Linux 2.6.28
		File system Format	ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS
		Driver	Serial, RTC, NET, Nand, LCD, Touch Screen, MMD/SD, USB OTG, DVI, Keypad, LED
	File System	File System Format	Ramdisk File System, UBI File System
		Function	Provided Lib (ALSA -lib, tslib, glibc), udev support
	Demo	Angstrom	Audio (XMMS), network (firefox), graphics editor (gimp) and document processing software (Abiword)
		Android	Google developed a platform based on Linux open-source mobile phone operating system.
		DVSDK	Support MPEG4, MPEG2, H264, mp3, aac audio/video formats and Codecs
WinCE	Boot	Version	x-load-1.41, eboot
		Boot Mode	Boot WinCE from SD card, NAND Flash or Ethernet
		Image update	Support updating image from SD card or Ethernet
	System	Characteristic	KITL kernel debug, Reboot, Watchdog, RTC
		Driver	display driver DVI, TFT LCD
			SD card, Keyboard, McSPI, McBSP, Audio, NET, NLED, USB OTG
		Function	Power Management (backlight drive, battery-driven, sleep/wake-up function)
			Hive registry support
			ROM file system support
		Software features	Mediaplayer 9.0, Word and Internet Explorer 6.0
			.NET Compact Framework 3.5

Interface Introduction

Order Information

Item	OMAP3530 Evaluation Kit (Standard Configuration) Price  US$199 (no LCD included)
Hardware	One Evaluation board        One 512MB SD card One Serial cable (IDC10-to-DB9) One 5V@2A Power adapter
Software and Documents	- Documents (user manual, schematic drawing, Datasheet) - WinCE.net 6.0 BSP - Linux 2.6.28 BSP
Item	OMAP3530 Evaluation Kit (Complete Configuration) Price  US$249 (7inch LCD included)
Hardware	One Evaluation board    One INNOLUX AT070TN83 7 inch LCD 800x480 (With Touch panel, CHI HSIN LR043JC211, we provide  4.3 inch and 5.6 inch LCD Model for option)    One 512MB SD card One Serial cable (IDC10-to-DB9) One 5V@2A Power adapter
Software and Documents	- Documents (user manual, schematic drawing, Datasheet) - WinCE.net 6.0 BSP - Linux 2.6.28 BSP
	+20USD for below addional cables. One Touch Pen One USB cable (Type A Male to Type Mini-B Male) One USB cable (Type A Female to Type Mini-A Male) One Cross Ethernet cable    One HDMI to DVI-D cable One S-Video cable

For accessory modules like camera, WIFI, GPS, GPRS etc, please find in modules and accessory catalog, new module of 3G support! If you need a whole enclosure/case , here is one.
Emulator for download/program/debug wince/linux bsp/drivers&applications.

Optional choose OMAP3530SBC

FAQ
Q: Does this kit support Ad hoc?
A: It supports Linux, thus supports Ad hoc, but you will port the protocol by yourself.