- TI DM3730 DaVinci Digital Media Processor based on 800MHz ARM Cortex-A8 core
- Onboard 512MByte DDR SDRAM, 512MByte NAND Flash
- 3 UART, 4 USB Host, USB OTG, Ethernet, Audio, TF, Keyboard, Jtag,...
- Supports 24-bit TFT LCD, DVI-D and S-Video Output Display
- Supports VGA, Camera, WiFi, GPS, GPRS, 3G Functions through Modules
- Supports for Linux2.6.32, Android 2.2 and WinCE 6.0.15

The Texas Instruments’ DM3730 DaVinci™ digital media processor is powered by up to 1-GHz (also supports 300, 600, and 800-MHz operation) ARM Cortex-A8 and 800MHz (also supports 250, 520 and 660-MHz operation) C64x+ DSP core, and has integrated 3D graphics processor, imaging and video accelerator (IVA), USB 2.0, MMC/SD memory card, UART and many more. DaVinci DM3730 video processor is pin-to-pin compatible with Sitara AM37x devices and software compatible with the OMAP35x processors. The C64x+ DSP and hardware video accelerator enable audio and HD 720p video decoding and encoding independent of the ARM processor.The programmable DSP engine allows multiple signal processing tasks such as image processing and analysis, digital filtering, and math functions. DaVinci DM3730 video processor is suitable for 720p HD (High Definition) video applications which require large amount of data processing. These applications include navigation systems, media players, medical patient monitoring devices, industrial test and measurement devices, industrial vision and portable communications.

This Evaluation Board takes full features of the DM3730 processor and supports up to 512MByte DDR SDRAM and 512MByte NAND Flash as well as a reserved iNAND design to expand the flash storage capabilities. The board has exposed many other hardware interfaces including serial ports, LCD/TSP, DVI-D, S-Video, Ethernet, USB, TF, keyboard, camera, SPI, I2C and JTAG. The board is able to support for Linux 2.6.32 and WinCE 6.0 operating systems. It has two methods to boot Linux and WinCE systems from either TF card or NAND flash. Besides, it is provided with Android 2.2 demo with driver source code. Embest gives instructions on how to boot Android demo image from NAND flash with TF card.

All necessary accessories help users start their own applications. The board is preloaded with Linux OS in NAND flash and WinCE OS in TF card. User can display the subsystem using a 4.3" TFT LCD and Touch screen or using a DVI-D monitor through an HDMI to DVI-D calbe, or using TV for NTSC/PAL video out. Along with the kit, we provides user manual, schematic drawing and datasheet documents to help customers better understand and use the kit.

Additionally, we offers various modules including VGA, WiFi, Analog Camera, GPS, GPRS 3G and Digital Camera modules which greatly extends the functions of the board and would be flexible for customer selection to meet their own needs.

Hardware Features

Mechanical Parameters

Dimensions: 136.2mm x 105.3mm
Power Supply: +5V
Working Temp.: 0~70°C

Processor

TI DM3730 DaVinci Digital Media Processor (pin-to-pin compatible with TI AM3715)
- Up to 1-GHz ARM® Cortex™-A8 Core, also supports 300, 600, and 800-MHz operation
(current supply on Devkit8500D board is 800-MHz)
- Up to 800-MHz TMS320C64x+™ DSP Core, Also supports 260, 520 and 660-MHz operation
(current supply on Devkit8500D board is 660-MHz)
- NEON™ SIMD Coprocessor
- POWERVR SGX™ Graphics Accelerator (DM3730 only)
- ARM: 32KB I-Cache; 32KB D-Cache; 256KB L2 Cache
- Onchip 32KB ROM and 64KB Shared SDRAM

Memory and Storage

512MB DDR SDRAM, 32bit, 200MHz
512MB NAND Flash, 16bit
2GB iNAND, 4bit (Default: not soldered, optional, reserved for soldering)
TF card slot

Data Transfer Interfaces

One 10/100M Ethernet interface (RJ45)
One High-speed USB2.0 OTG port (Mini USB type interface)
Four High-speed USB2.0 Host port (USB A type interface)
Three serial ports (UART1: 5-wire TTL serial port; UART2: 5-wire TTL serial port; UART3: 5-wire RS232 serial port)

Audio/Video Interfaces

LCD/Touch Screen interface (50-pin FPC connector, support resolution up to 2048*2048)
DVI high-resolution image output port (HDMI interface, support 720p, 30fps signal)
One S-Video display interface
One audio input interface (3.5mm audio jack)
One 2-channel audio output interface (3.5mm audio jack)
One camera interface (30-pin FPC connector, support CCD or CMOS camera)

Input/Output Interfaces and Other Facilities

6*6 keyboard interface
One 14-pin Jtag interface
Four buttons (One for Reset, one for Wakeup and two for User defined)
One expansion connector (2.0mm 40-pin SMT Female Pin Header, McSPI, McBSP, I2C, HDQ, GPIO are led out from this connector)

Software Features

OS	Item		Remark
Linux	BIOS	x-loader	NAND/ONENAND
			MMC/SD
			FAT
		u-boot	NAND/ONENAND
			MMC/SD
			FAT
			NET
	Kernel	Linux 2.6.32	Supports ROM/CRAM/EXT2/EXT3/FAT/ NFS/ JFFS2/UBIFS file systems
	Device Driver	Serial port, RTC, Ethernet, Nand Flash, LCD, Touch screen, MMC/SD (supports TF card and iNAND), USB OTG, USB ehci, Audio input/output, keypad, LED
		Display driver (TFT LCD, DVI-D, S-Video)
	GUI	Android 2.2	froyo
Android	Kernel	Android 2.2	froyo
	Device Driver	Serial port, RTC, Ethernet, Nand Flash, LCD, Touch screen MMC/SD (supports TF card and iNAND), USB OTG, USB ehci, Audio input/output, keypad, LED, 2D/3D (do not provide source code)
WinCE	BIOS	x-loader	NAND
			ONENAND
			TF
		e-boot	NAND
			ONENAND
			TF
	OAL	OAL module	REBOOT
			Watchdog
			RTC
		KITL module	RNDIS KITL
	Device Driver	LED, GPIO/I2C/SPI/MCBSP, Serial port, keypad, Audio input/output, NAND Flash, Touch screen SD/MMC/SDIO (support TF card and iNAND), Ethernet, USB OTG, USB ehci, VRFB, DSPLINKK/CMEMK, analog camera (supports CCD camera), GPIO, PWM (TPS65930), ADC (TPS65930), Power Management (backlight, battery, Sleep/Wakeup, extension)
		Display driver (TFT LCD, DVI-D, S-Video)
	APP	application module	Flash Player plug-in and Flash player
			MP3/MPEG4/H264 DSP hardware decoder

Onboard Interfaces and Connectors

Order Information
Order No.	T6010140
Item	Evaluation Board
Deliveries	One Evaluation board  download link for  user manual, schematic in PDF format, datasheet, Linux 2.6.32 BSP, Android 2.2 BSP and WinCE 6.0 BSP
Price	US$149 (Minimum Order Quantity: 10pcs)
Remark	We accept orders for replacing DM3730 by AM3715 processor for this board, Please specify the CPU when you placing orders.
Order No.	T6030030D
Item	Evaluation Kit Standard Configuration
Deliveries	One Evaluation board    One 2GB TF card One Serial cable (DB9-DB9) One 5V@2A Power adapter One USB cable (Type A Male to Type Mini-B Male) One USB cable (Type A Female to Type Mini-A Male)    One Cross Ethernet cable    One HDMI to DVI-D cable One S-Video cable Download link (including user manual, schematic in PDF format, datasheet, Linux 2.6.32 BSP, Android 2.2 BSP and WinCE 6.0 BSP)
Price	US$199
Order No.	T6010142	T6010144
Item	Evaluation Kit (Complete Configuration)
Deliveries	One Embest Devkit8500D Evaluation Kit Standard Configuration One 4.3" LCD or 7" LCD (With touch screen) One Product DVD (including user manual, schematic in PDF format, datasheet, Linux 2.6.30 BSP, Android 2.2 BSP and WinCE.net 6.0 BSP)  Remark: 4.3”LCD (resolution: 480*272), 7"LCD (resolution: 800*480)
Price	With 4.3" LCD	With 7" LCD
	US$309	US$329
Options	VGA, WiFi, Analog Camera, GPS and Digital Camera modules 49USD each, GPRS 3G modules 99USD each.